Securing Networks with Cisco Firepower (300-710 SNCF)

Here you have the best Cisco 300-710 practice exam questions

You have 251 total questions to study from
Each page has 5 questions, making a total of 51 pages
You can navigate through the pages using the buttons at the bottom
This questions were last updated on November 20, 2024

Question 1 of 251

What is a result of enabling Cisco FTD clustering?

For the dynamic routing feature, if the master unit fails, the newly elected master unit maintains all existing connections.

Integrated Routing and Bridging is supported on the master unit.

Site-to-site VPN functionality is limited to the master unit, and all VPN connections are dropped if the master unit fails.

All Firepower appliances support Cisco FTD clustering.

Correct Answer: C

Enabling Cisco FTD clustering results in VPN functionality being limited to the master unit, meaning all VPN connections will be dropped if the master unit fails. This configuration is designed so that site-to-site VPNs do not leverage the high availability benefits provided by clustering, and instead, they rely on the master unit's availability.

Question 2 of 251

Which two conditions are necessary for high availability to function between two Cisco FTD devices? (Choose two.)

The units must be the same version

Both devices can be part of a different group that must be in the same domain when configured within the FMC.

The units must be different models if they are part of the same series.

The units must be configured only for firewall routed mode.

The units must be the same model.

Correct Answer: A, E

For high availability to function between two Cisco FTD devices, it is essential that the units must be the same version and the same model. This ensures compatibility in terms of both hardware and software, which is crucial for seamless failover and synchronization.

Question 3 of 251

On the advanced tab under inline set properties, which allows interfaces to emulate a passive interface?

transparent inline mode

TAP mode

strict TCP enforcement

propagate link state

Correct Answer: B

TAP mode allows interfaces to emulate a passive interface by enabling the inline device to monitor the traffic without actually intercepting or altering the traffic flow. This is useful for network monitoring and analysis, as the traffic remains unaffected. Propagate link state, on the other hand, manages the link state of paired interfaces and does not enable passive monitoring of traffic. Therefore, the correct answer is TAP mode.

Question 4 of 251

What are the minimum requirements to deploy a managed device inline?

inline interfaces, security zones, MTU, and mode

passive interface, MTU, and mode

inline interfaces, MTU, and mode

passive interface, security zone, MTU, and mode

Correct Answer: C

To deploy a managed device inline, the minimum requirements are the inline interfaces, MTU, and mode. Security zones are optional when setting up the device in an inline configuration. The security zone configuration can be done separately and is not mandatory for the initial deployment.

Question 5 of 251

What is the difference between inline and inline tap on Cisco Firepower?

Inline tap mode can send a copy of the traffic to another device.

Inline tap mode does full packet capture.

Inline mode cannot do SSL decryption.

Inline mode can drop malicious traffic.

Correct Answer: D

Inline mode on Cisco Firepower allows the device to actively monitor and control network traffic. In this mode, it can inspect data packets and take action such as dropping malicious traffic based on predefined security policies. This enables the device to prevent harmful data from reaching its destination. Other modes such as inline tap mode are more passive, generally used for monitoring and analysis, and do not have the capability to drop or block traffic.