Which TLV value must be added to Option 43 when DHCP is used to ensure that APs join the WLC?
Which TLV value must be added to Option 43 when DHCP is used to ensure that APs join the WLC?
To ensure that Access Points (APs) join the Wireless LAN Controller (WLC) when DHCP is used, the TLV value of 0xf1 needs to be added to Option 43. This value identifies the required DHCP option for Cisco devices, specifically for providing the list of WLC management interface IP addresses.
Correct C https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/97066-dhcp-option-43-00.html
C The following is the format of the TLV block: • Type: 0xf1 (decimal 241) • Length: Number of controller IP addresses * 4 • Value: List of WLC management interfaces
Correct C https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/97066-dhcp-option-43-00.html
C is correct
Type: 0xF1 - This identifies the TLV as DHCP option 43 for Cisco devices