Refer to the exhibit. R1 is not forming adjacency on a point-to-point interface. Which action resolves the issue?
Refer to the exhibit. R1 is not forming adjacency on a point-to-point interface. Which action resolves the issue?
The debug output indicates that there is a mismatched NSSA option bit between the routers. This kind of mismatch typically occurs when the area types configured on the routers do not match. To form an OSPF adjacency, the area type configuration must be identical on both routers. Therefore, the correct action is to ensure that the area types are configured the same on each router.
https://community.cisco.com/t5/networking-knowledge-base/receiving-the-ospf-hello-from-x-x-x-x-with-mismatched-nssa/ta-p/3131668
everytime you receive something like "mismatched nssa option bit" means its a mismatch on the area type: https://supportportal.juniper.net/s/article/ScreenOS-OSPF-is-not-coming-up-and-an-error-regarding-stub-nssa-option-bit-mismatch-is-generated-in-debugs?language=en_US. To resolve this issue, change the area type on any of the sites to match the peer site.
B its the right one