Which two actions are needed to configure a single Cisco APIC controller for Cisco ACI fabric for the first time? (Choose two.)
Which two actions are needed to configure a single Cisco APIC controller for Cisco ACI fabric for the first time? (Choose two.)
To configure a single Cisco APIC controller for Cisco ACI fabric for the first time, two essential actions are needed: first, configure the initial APIC controller, which establishes the management and policy layer for the fabric. Second, register the switches that are discovered through LLDP (Link Layer Discovery Protocol), which is a protocol used to detect and configure devices on the network. This ensures that the APIC recognizes and manages the switches in the ACI fabric.
CD - we dont need to discover all Leafs and Spines to configure the APIC
I would say correct answer is C,D: 1.configure first APIC 2.register switches discovered by LLDP
Correct Answer : 1. configure first APIC 2. discovery and register nodes and fabric (Spine & Leaf) https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/white_papers/Cisco-ACI-Initial-Deployment-Cookbook.html
You can onl register leaf and spine switches which are discovered via LLDP.
Cant be A. All leafs and switches are found by APIC trough LLDP.
It is impossible to register switches when they are not connected. To Answer is CD
A,D looks correct.
The first APIC should be configured. Only the switches which are discovered can be registered.
CD is correct