Specialist - Implementation Engineer, VxRail Appliance Exam

Here you have the best Dell DES-6321 practice exam questions

  • You have 52 total questions to study from
  • Each page has 5 questions, making a total of 11 pages
  • You can navigate through the pages using the buttons at the bottom
  • This questions were last updated on November 29, 2024
Question 1 of 52

What is the default network traffic configuration for a VxRail node with 2 x 10 GbE ports?

    Correct Answer: D

    The default network traffic configuration for a VxRail node with 2 x 10 GbE ports typically allocates Management and Virtual Machines on Uplink1, while prioritizing vSAN and vMotion on Uplink2. This configuration helps balance the load across the uplinks, dedicating one to the critical vSAN and vMotion operations and the other to management and virtual machine traffic.

Question 2 of 52

What is required to enable vSAN encryption on a VxRail cluster?

    Correct Answer: D

    To enable vSAN encryption on a VxRail cluster, an external Key Management Server (KMS) is required. The vCenter Server can be either internal or external, but an external KMS is essential for managing the encryption keys securely. Therefore, the correct option is an internal vCenter Server with an external Key Management Server.

Question 3 of 52

A customer is configuring VxRail to connect to an existing, external SRS VE. Their support account is associated with the Site ID/Party ID where VxRail is installed. A validation error is issued when the customer attempts to register VxRail in SRS.

What is the possible cause for the error?

    Correct Answer: A

    The possible cause for the error is that the status of VxRail in the Install Base is 'Shipped'. When a hardware or software component is listed as 'Shipped' in the Install Base, it typically means that it has been dispatched but not yet installed or registered in the system properly. Hence, the customer might encounter a validation error when trying to register VxRail in SRS.

Question 4 of 52

What is the minimum number of VxRail hosts required if FTT = 1 and FTM is set to Erasure Coding?

    Correct Answer: B

    For a VxRail environment where Fault Tolerance Method (FTM) is set to Erasure Coding and the Fault Tolerance Threshold (FTT) is set to 1, the minimum number of hosts required is 4. This is because Erasure Coding typically requires a minimum of 4 hosts to distribute the data and parity efficiently while ensuring fault tolerance. The specific setup of Erasure Coding (RAID 5/6) in VxRail environments necessitates this host count to maintain data protection and efficiency.

Question 5 of 52

The vCenter managing a VxRail cluster must be able to support both Enhanced Linked Mode and vSAN Encryption.

What is the correct configuration to satisfy this requirement?

    Correct Answer: B

    Starting with vSphere 7.0, the external Platform Services Controller (PSC) is deprecated. Therefore, the correct configuration must use an embedded PSC. Enhanced Linked Mode and vSAN Encryption are both supported with an embedded vCenter Server and embedded PSC.